redirect
Loading...
TEW-929DRU
2
Dashboard
Overview
System
Time / Date
Schedule
Dynamic DNS
Samba (USB)
WoL
Routes / ARP
System Log
Device Mode
Bark®
Network
LAN
WAN
IPv6
VLAN
Routing
Wireless
Wireless 2.4GHz
Wireless 5GHz
Guest Network
WPS
Captive Portal
Security
Firewall
VPN
ALG
RADIUS
UPnP / NAT-PMP
Multi-WAN / QoS
Multi-WAN
QoS
Management
Administration
Certificate Management
Access Management
Firmware / Configuration
Reboot
Tools
Diagnostics
Ping Watchdog
Save
Logout
New firmware is available!
Go to upgrade new firmware...
PPTP Server
L2TP Server
IPSec
OpenVPN Server
OpenVPN Client
L2TP VPN Server
This section allows you configure the integrated L2TP VPN server or L2TP with IPsec server for client-to-site based VPN applications. The L2TP VPN protocol alone is outdated and insecure, however, the successor, L2TP with IPsec incorporates more secure cryptographic functions and is typically built into most modern computer and mobile client device operating systems for reduced configuration complexity and simplified setup.
Service Setting
Service Setting
Enable
Enable or Disable L2TP Server
Local IP
Server Local IP. Default:192.168.0.1
Client IP
Client's Range. Default:192.168.0.101-192.168.0.110. Only for Class C. The maximum IP address is 10.
Access LAN
Access VLAN
DNS Server 1
First DNS Server. Default:192.168.0.1
DNS Server 2
Second DNS Server. Default:8.8.8.8
Authentication
CHAP
PAP
MS-CHAP
MS-CHAPv2
CHAP/PAP/MS-CHAP/MS-CHAPv2
User Account
User Account
Profile
Enable
User name
Password
< < Table is empty > >
Connected Clients
Connected Clients
User Name
Virtual IP
Remote Real IP
Bytes Received
Bytes Sent
< < Table is empty > >
L2TP Server Status
L2TP Server Status
L2TP-Server is not running now and it's enabled on the startup